Ultrasonic Flowmeter Upgrading Project

On March 2009, we upgraded our GE ultrasonic flowmeter from type of XMT868 to XMT868i and equipped with the surge arrester.

It was found that the fuse on the old meter electronic card was blown. After replaced the meter was OK. However, after that, the old meter was suddenly off temporarily, after which it was back to OK again and it happen several times.

Considering its important function to measure how many filtered produced water injected to the wells for enhanced oil recovery program, we decide to replace it with the new one equipped with the surge arrester as suggested by engineer from GE.

Configuring the meter          The new GE XMT868i 

Advertisements
Published in: on June 10, 2009 at 10:05 am  Leave a Comment  

The URI to TrackBack this entry is: https://hendristmt.wordpress.com/2009/06/10/ultrasonic-flowmeter-upgrading-project/trackback/

RSS feed for comments on this post.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: